How to Utilize Branding

How to Utilize Branding

Some brands may require additional items to be attached to the printed product such as swing tags or neck labels.

this can be achieved by utilizing the 'Brand Station' from the 'Floor' menu.

When using the 'QC Station' once the item is marked as 'QC Passed' if branding is required you will be advised to proceed to branding.



When the barcode is scanned in the 'Brand Station' it will display an image of the product and all the branding information will show the brand name and location along with a thumbnail of the branding item that needs to be added to the product.

 

Any product that has a branding set on them utilizes the optional branding scan point the branding must be set up on an attribute set.
How to create attribute sets?



The branding attribute set then can be added to one or more products in CPP in the  ‘Ecommerce & data’ section and under the ‘Info’ tab.




Branding is set on the virtual level only so is not based on variant options (size/colour).



    • Related Articles

    • Floor | Branding Station

      Some brands may require additional items to be attached to the printed product such as swing tags or neck labels. This can be achieved by utilizing the 'Brand Station' from the 'Floor' menu. When using the 'QC Station' once the item is marked as 'QC ...
    • Outputting an EAN Barcode at the Branding Station

      Introduction It is now possible to output EAN barcodes (specifically EAN-13 barcodes) at the Branding Station.  As part of your production process, there may be a requirement to attach an EAN barcode label to the item. These can now be printed at the ...
    • Stock Picking Document - Standard By Quantity V3

      An example of the label can be seen below, and in PDF form attached.  This label can ONLY be produced from V3 of the Kornit X Platform as it has been built specifically for this version.  This label contains a Name, SKU, Quantity and Branding Station ...
    • Floor Workflow 5

      This article details the journey through then Floor module we call Floor Workflow 5. This workflow is suited best for Sublimation, UV and other technologies where you are printing artwork in advance to be applied to blank goods and these can be ...
    • Floor Workflow 3

      This article details the journey through then Floor module we call Floor Workflow 3. This workflow is suitable for production were the finished goods can have a barcode printed on products integrated with other artwork. This barcode can be used for ...