Floor | Batch Barcode Labels
Batch Barcode Labels is a station in our Floor module.
This station allows the scanning of Batch barcodes or the entry of a Batch ID to trigger the printing of barcode labels for items on the job. These labels are made to be applied to items post printing to allow for identification and further scanning on an item level.
The Batch Barcodes station is available at the following link - https://platform.custom-gateway.net/v2/production-v2/batch-barcode-labels
The barcodes come out in a PDF format and if muliple items it will have multiple pages. These are formatted for use on roll fed label printers
An example label is below and the PDF attached for reference
The label size on the output is 52 x 27mm
Here is some example label stock that will be size appropriate - https://www.aalabels.com/roll-labels/rectangle/c973
Please note labels required will differ depending on your label printer make and model so be sure to check compatibility.
NOTE - This PDF can be printed smaller or larger as required but may effect the ability to scan and read. There is no setting change in the platform to change this, the printer should generally auto scale to fit.
Related Articles
Production Module : Creating a Job Template for use as an Artwork Generation Batch
Overview The Production and Floor modules have the tools to allow Fulfillers to batch process order items in multiples in order to improve production efficiency. There are two types of batch available for processing order items: Consolidation Batch ...Floor Workflow 4
This article details the journey through then Floor module we call Floor Workflow 4. This workflow allows the printing of a batch of items at the same time and then labelling them for further stations. A job can contain multiple items and a master ...Floor Workflow 6
This article details the journey through then Floor module we call Floor Workflow 6. This workflow allows for a pre pick of stock from a master jobsheet first which contains a batch level barcode. This means the batch level barcode can be used for ...Floor Workflow 5
This article details the journey through then Floor module we call Floor Workflow 5. This workflow is suited best for Sublimation, UV and other technologies where you are printing artwork in advance to be applied to blank goods and these can be ...Floor Module : Our Workflows
The Custom Gateway Floor Module has large number of tools which can all be used together in different ways to achieve a "Workflow". A workflow is a pathway through the system from order received to dispatched. Different workflows lend themselves to ...