Deciding What Print Options Are Needed for Your Workflow
Sending artwork to your printers is a very important part of your workflow as can save you a lot of wasted clicks and manual processing time the chart below should help you understand the best way to set up your printers using Gateway OMS
here are some related links to get more details on the fifferent Options
1. Print Server
2. Cloud RIP
5. Batch Template Integrations
Related Articles
Kornitˣ | Workflow Hardware
The following articles has been created to show the recommended hardware we recommend when using the Kornitˣ Workflow. Label Printer - For Picking Station Labels should ideally be heat resistant, as they will be exposed to heat presses and drying ...Print Areas | How to Add Bleed (setup and preview options)
Overview The print output file generated by the system is determined by the Print Size specified on a product's Print Area. If Bleed is a requirement, then it should always be included when setting the Print Size in mm. This document will cover the ...Virtual Products | Virtual Aspects & Options
This article assumes a certain level of knowledge regarding Virtual product creation, please ensure that you are familiar with either our academy course for retailers or our knowledge base articles on Virtual product creation. ...Artwork Generation | Troubleshooting Common Print Job Problems
Overview This article is designed to help troubleshoot common problems related to print jobs or artwork generation Optimisation The amount of memory resource that a print job requires depends on numerous factors such as: - Number of Print areas - ...Print Areas | Options (Advanced) > Adding Print Effects
Overview The general purpose of Print effects is for incidences when the print output needs to be visually different to the app preview. So for instance, let’s say the personalised product you are creating is a tumbler or wine glass that you can add ...